Comparative Assessment of the Antibacterial and Antibiofilm Actions of Benzalkonium Chloride, Erythromycin, and L(+)-Lactic Acid against Raw Chicken Meat Campylobacter spp. Isolates.

Campylobacter spp. are significant zoonotic agents, which cause annually millions of human cases of foodborne gastroenteritis worldwide. Their inclusion in biofilms on abiotic surfaces seems to play a pivotal role in their survival outside of the host, growth, and spread. To successfully mitigate the risks that arise with these bacteria, it is crucial to decrease their prevalence within the food production chain (from farm to the table), alongside the successful treatment of the resulting illness, known as campylobacteriosis. For this, the use of various antimicrobial agents remains actively in the foreground. A general-purpose biocide and cationic surfactant (benzalkonium chloride; BAC), a widely used macrolide antibiotic (erythromycin; ERY), and a naturally occurring organic acid (L(+)-lactic acid; LA) were comparatively evaluated in this work for their potential to inhibit both the planktonic and biofilm growth of 12 selected Campylobacter spp. (of which, seven were C. jejuni and five were C. coli) raw chicken meat isolates, all grown in vitro as monocultures. The inhibitory action of LA was also studied against four mixed-culture Campylobacter biofilms (each composed of three different isolates). The results showed that the individual effectiveness of the agents varied significantly depending on the isolate, growth mode (planktonic, biofilm), intercellular interactions (monocultures, mixed cultures), and the growth medium used (with special focus on blood presence). Thus, BAC exhibited minimum inhibitory concentrations (MICs), minimum bactericidal concentrations (MBCs), and minimum biofilm inhibitory concentrations (MBICs) that ranged from 0.5 to 16 µg/mL. Interestingly enough, these values varied widely from 0.25 to 1024 µg/mL for ERY. Concerning LA, the MICs, MBCs, and MBICs varied from 1024 to 4096 µg/mL, with mixed-culture biofilm formation always being more difficult to suppress when compared to biofilm monocultures. In addition, it was evident that intercellular interactions encountered within mixed-culture Campylobacter biofilms significantly influenced both the population dynamics and the tolerance of each consortium member to acid exposure. Overall, the findings of this study provide useful information on the comparative effectiveness of three well-known antimicrobial agents for the control of Campylobacter spp. under various growth modes (i.e., planktonic, biofilm, monocultures, mixed cultures) that could potentially be encountered in food production and clinical settings.

Influence of Dead Cells Killed by Industrial Biocides (BAC and DBNPA) on Biofilm Formation.

Industrial biocides aim to keep water systems microbiologically controlled and to minimize biofouling. However, the resulting dead cells are usually not removed from the water streams and can influence the growth of the remaining live cells in planktonic and sessile states. This study aims to understand the effect of dead Pseudomonas fluorescens cells killed by industrial biocides-benzalkonium chloride (BAC) and 2,2-dibromo-3-nitrilopropionamide (DBNPA)-on biofilm formation. Additionally, the effect of different dead/live cell ratios (50.00% and 99.99%) was studied. The inoculum was recirculated in a Parallel Plate Flow Cell (PPFC). The overall results indicate that dead cells greatly affect biofilm properties. Inoculum with DBNPA-dead cells led to more active (higher ATP content and metabolic activity) and thicker biofilm layers in comparison to BAC-dead cells, which seems to be linked to the mechanism of action by which the cells were killed. Furthermore, higher dead cell ratios (99.99%) in the inoculum led to more active (higher culturability, metabolic activity and ATP content) and cohesive/compact and uniformly distributed biofilms in comparison with the 50.00% dead cell ratio. The design of future disinfection strategies must consider the contribution of dead cells to the biofilm build-up, as they might negatively affect water system operations.

Opuntioideae cactus stem Bioimaging analysis: Bridging taxonomy and antimicrobial research.

This study presents a comprehensive scanning electron microscopy (SEM) analysis of Opuntioideae cactus stems indigenous to the arid regions of Saudi Arabia, elucidating their intricate microstructural features. The findings not only advance taxonomic understanding by aiding in species differentiation but also reveal the antimicrobial potential of these cacti, highlighting their significance as valuable natural resources for both ecological and pharmaceutical applications. The present study is aimed to present the stem epidermal anatomical description of Opuntioideae (Cactaceae) belonging to genus Opuntia (five Species), Cylindropuntia (two Species), and Austrocylindropuntia (one Species) as tool for systematic identification. Stem epidermal anatomical features represent here are epidermal cells, stomatal complex, subsidiary cells, and trichomes findings was observed using light microscope and SEM. The stem epidermal sections were made by heating in test tube containing lactic acid and nitric acid protocol. In anatomical findings, irregular, zigzag, wavy, and polygonal epidermal cells with sinuate, sinuous, and straight anticlinal walls were observed. Quantitatively minimum length (28.05 ± 2.05 µm) and width (23.15 ± 3.41 µm) of epidermal cells were noted in Cylindropuntia kleiniae. Paracytic type of stomata present was observed in all species with kidney-shaped guard cell present in six species, and in Opuntia macrocentra and Austrocylindropuntia subulata, dumbbell-shaped guard cells were observed. The largest length of stomata (53.25 ± 2.05 µm) and width of stomata (35.10 ± 5.19 µm) were observed in Opuntia monacantha. In present research work, stem anatomical features show many diverse characters are of special attention for plant taxonomist for the correct identification and provide baseline for further study in subfamily Opuntiodeae. RESEARCH HIGHLIGHTS: The intricate microstructures of Opuntioideae cactus stems. Investigating the antimicrobial potential of compounds found within Opuntioideae cactus stems. Correlations between the unique structural features observed through SEM and the antimicrobial activity of Opuntioideae cactus stem extracts.

Association of Papacarie Duo® and low-level laser in antimicrobial photodynamic therapy (aPDT).

Dental caries is a multifactorial, non-communicable disease. Effective treatment options for minimally invasive removal of carious tissue include Papacarie Duo® gel and antimicrobial photodynamic therapy (aPDT). aPDT involves a combination of a light source and photosensitizer. Given that Papacarie Duo® contains a percentage of blue dye, this study aims to explore the antimicrobial potential of Papacarie Duo® when associated with a light source against Streptococcus mutans strains. The chosen light source was a low-power diode laser (λ = 660 nm, E = 3 J, P = 100 mW, t = 30 s). To assess antimicrobial capacity, planktonic suspensions of Streptococcus mutans were plated on Brain Heart Infusion Agar (BHI) to observe the formation of inhibition halos. The studied groups included methylene blue (0.005%), Papacarie Duo®, distilled water (negative control), 2% chlorhexidine (positive control), Papacarie Duo® + laser, and methylene blue (0.005%) + laser. Following distribution onto plates, each group was incubated at 37 °C for 48 h under microaerophilic conditions. Inhibition halos were subsequently measured using a digital caliper. The results showed that chlorhexidine had the greatest antimicrobial effect followed by the group of irradiated methylene blue and irradiated Papacarie Duo®. All experimental groups demonstrated antimicrobial potential, excluding the negative control group. The study concludes that Papacarie Duo® exhibits antimicrobial properties when associated with a low-power diode laser.

Antimicrobial activity of cleansers on the cobalt-chromium surface of removable partial denture: a systematic review.

This study aimed to review systematically the literature about the antimicrobial action of evaluated cleansers on the Co-Cr alloy of RPD. The search was conducted in MEDLINE/PubMed, Scopus, Lilacs, Embase and Science Direct May, 2022. The review was performed based on PRISMA guidelines and recorded in Open Science Framework. Independent reviewers performed the search, selection, extraction, and analysis of the data. The risk of bias of the in vitro and clinical trials studies was analyzed by the Joanna Briggs Institute tool. A total of 187 articles were found and 9 were included. The cleansers that showed antimicrobial action were 2% and 5.25% sodium hypochlorite, 0.12% chlorhexidine and NitrAdine effervescent tablet. Polident, Corega Tabs effervescent tablets and 5 mg/mL chitosan solution showed intermediate effects. Propolis and green tea toothpaste were not effective. Three articles presented a high risk of bias and 6, low risk. The cleansers that showed the highest antimicrobial efficacy on Co-Cr alloy were 0.12% chlorhexidine digluconate and NitrAdine and can be safely used on RPD framework.

Potential applications of green-synthesized iron oxide NPs for environmental remediation.

Water pollution is a significant issue worldwide due to an increase in anthropogenic activities. Heavy metals and dyes are among the most problematic contaminants that threaten the environment and negatively impact human health. Iron oxide nanoparticles (IONPs) synthesized using green methods have shown potential in these areas due to their significant adsorption capacity and photocatalytic potential. The size and morphology of biogenic IONPs can be tailored depending upon the concentration of the reducing medium and metal salt precursor. Green-synthesized IONPs have been found to be effective, economical, and environmentally friendly with their large surface area, making them suitable for removing toxic matter from contaminated water. Furthermore, they exhibit antibacterial potential against harmful microorganisms. The study emphasizes the importance of using such environmentally friendly tools to remove heavy metal ions and organic compounds from contaminated water. The underlying mechanism for the adsorption of heavy metal ions, photocatalytic degradation of organic compounds, and antimicrobial action has been explored in detail. The future prospective for the beneficial utilization of biogenic IONPs has also been signified to provide a detailed overview.

Avaliação antimicrobiana de uma resina Bulk Fill Fluida com inserção do xilitol / Antimicrobial evaluation of a Fluid Bulk Fill resin with xylitol insertion

Introdução: As resinas Bulk Fill apresentam uma boa procura pelos profissionais, pois o seu uso diminui o tempo clínico, como também a melhora qualidade das restaurações, porém não possuem atividade antibacteriana, sendo um dos fatores que ainda causam impacto negativo na vida das pessoas. A biomodificação com o xilitol tem o sentido de produzir ação microbiana e com isso aperfeiçoar as suas características clínicas. Objetivo: Avaliar a ação antimicrobiana de uma resina Bulk Fill flow após a inserção do xilitol. Metodologia: A resina Tetric® N-Flow Bulk Fill foi misturada às concentrações de xilitol (0% [Controle], 2,5% e 5% p/p). Amostras cilíndricas (n=5 do grupo controle e n=3 dos demais grupos experimentais) foram confeccionadas em moldes acrílicos de diâmetro de 2mm espessura, fotoativadas por 10s e armazenadas a 37ºC por 24h. Os espécimes foram esterilizados por luz ultravioleta por 20 minutos antes de serem acomodadas em uma placa de 48 poços estéril, sendo adicionado em cada poço 0,5mL de caldo Mueller Hinton. Então, adicionou-se 50µL do inóculo de S. mutans nos poços correspondentes. A placa foi incubada a 37 ± 1 ˚C durante 48 horas. Após o período de incubação, os espécimes foram gentilmente removidos e o crescimento microbiano foi indicado pela adição de 100µL da solução aquosa de resazurina (SigmaAldrich) a 0,01% com a posterior incubação a 37 ± 1 ˚C por duas horas. Micro-organismos viáveis reduzem o corante mudando sua coloração azul para rosa e a CIM foi definida como a menor concentração da substância que inibiu a mudança de coloração da resazurina. Em um poço contendo o grupo controle foi acrescentado clorexidina a 0,12% com o intuito de comparar o resultado gerado dos grupos testes. Resultado: Não houve inibição do crescimento bacteriano nos poços com inóculos que continham S. mutans e corpo de prova de resina acrescida de xilitol. Conclusão: Esse estudo mostrou que o acréscimo de 2,5% e 5% de Xilitol à resina Tetric® N-Flow Bulk Fill não apresentou inibição do crescimento bacteriano (AU).

Introduction: Bulk Fill resins are in good demand among professionals, as their use reduces clinical time and improves the quality of restorations, but they do not have antibacterial activity, which is one of the factors that still hurt people's lives. Biomodification with xylitol aims to improve its clinical characteristics. Objective: To evaluate the antimicrobial action of a Bulk Fill flow resin after inserting xylitol. Methodology: Tetric® N-Flow Bulk Fill resin was mixed with xylitol concentrations (0% [Control], 2.5% and 5% w/w). Cylindrical samples (n=5 from the control group and n=3 from the other groups) were made in acrylic molds with a diameter of 2 mm thick, light-cured for 10 s and stored at 37ºC for 24h. The specimens were sterilized by ultraviolet light for 20 minutes before being placed in a sterile 48-well plate, with 0.5 mL of Mueller Hinton broth added to each well. The plate was incubated at 37 ± 1 ˚C for 48 hours. After the incubation period, the specimens were gently removed, and microbial growth was indicated by adding 100 µL of 0.01% resazurin aqueous solution with subsequent incubation at 37 ± 1 ˚C for two hours. Viable microorganisms reduce the dye, changing its color from blue to pink. The MIC was defined as the lowest concentration of the substance that inhibited the color change of resazurin. In 0.12%, chlorhexidine was added to a well containing the control group to compare the results generated from the test groups. Result: There was no inhibition of bacterial growth in the wells with inocula containing S. mutans and the resin specimen with xylitol added. Conclusion: This study showed that adding 2.5% and 5% Xylitol to the Tetric® N-Flow Bulk Fill resin did not inhibit bacterial growth (AU).

Inhibitory-like Substances Produced by Yeasts Isolated from Andean Blueberries: Prospective Food Antimicrobials.

Natural agents from microorganisms have emerged as suitable options to replace chemical preservatives in foods. In this study, the antibacterial activity of cell-free supernatant (CFS) from five native yeasts (Saccharomyces cerevisiae Lev6 and Lev30, C. pseudointermedia Lev8, Candida intermedia Lev9, C. parapsilosis Lev15) and the reference S. boulardi SSB, was evaluated against some indicator food pathogens. The generation of antimicrobials was reliant on strain-, and sugar-supplemented media, which supported yeast growth established at 30 °C and 200 rpm for 48 h. Treatment with proteinase K and catalase was unable to completely abolish the inhibitory effect, indicating that the active components are likely complex combinations of acids, proteins, hydrogen peroxide, and other metabolites. Although there was no impact on Listeria monocytogenes, exposure to CFS and extracellular fractions obtained through precipitation with methanol (PPm) at 120 °C for 60 min significantly (p < 0.05) increased the inhibitory activity against Escherichia coli, Salmonella enterica, Kosakonia cowanii, and Staphylococcus aureus, indicating that the inhibitory activity was stimulated by heat. Likewise, a synergistic inhibitory action against Listeria was obtained following the pretreatment of PPm with EDTA (ethylenediaminetetraacetic acid). These activities were yeast strain-dependent, with Lev6, Lev8, and Lev30 showing the highest activity. In addition, a heat-stable low-molecular-mass molecule under 5 kDa was detected in Lev30. Further research is required to evaluate the mode of action and characterize the composition of the released molecules in the CFS in order to develop a novel biocontrol agent based on yeasts.

Antimicrobial efficacy of Kerr pulp canal sealer (EWT) in combination with 10% amoxicillin on Enterococcus faecalis: A confocal laser scanning microscopic study.

Background: Sealers with antimicrobial properties play an important role in endodontic therapy success especially against Enterococcus faecalis infection found in failed root canal therapy. Addition of antibiotic agents to endodontic sealers may show significant increase in their antibacterial properties both against anaerobic and aerobic microbes. The purpose of the present study was to evaluate antimicrobial efficacy of Kerr pulp canal sealer (EWT) in combination with 10% amoxicillin against E. faecalis and post-root canal treatment viability of Enterococcus faecalis on the first and seventh day. Methods: A total of 60 extracted human mandibular premolar teeth were decoronated after initial decontamination with 1% NaOCl. Root length standardized to 12 mm. Canal instrumentation was done using ProTaper Universal file system till size F2 using 5.25% NaOCl. It was then infected with a pure strain of E. faecalis for a period of four days. Obturation was done using plain sealer, (n=30) and sealer-antibiotic combination, (n=30). Half of the teeth were sectioned at 24 hours (S, SA) and other half were sectioned seven days after obturation (S7, SA7). All samples were stained with SYTO9 and propidium iodide for imaging under Confocal Laser Scanning microscope. Statistical analysis was performed with the statistical software SPSS v. 17.0 (SPSS for Windows; SPSS Inc, Chicago, IL). Data was analysed using One Way ANOVA and post hoc Tukey test to determine statistical significance with p value < 0.01 considered significant. Results: Statistically significant differences were observed in green to red ratio between group S (9.561976) and S7 (0.435418) (p < 0.01). There was no difference found between SA (mean of green to red ratio, (0.70431) and SA7 (mean of green to red ratio, 0.85184). Conclusions: Antibiotics added to the sealer effectively eradicated of E. faecalis 24 hours post-obturation. However, after seven days, plain sealer was as effective as sealer-antibiotic combination.

Combating Microbial Infections Using Metal-Based Nanoparticles as Potential Therapeutic Alternatives.

The nature of microorganisms and the efficiency of antimicrobials have witnessed a huge co-dependent change in their dynamics over the last few decades. On the other side, metals and metallic compounds have gained popularity owing to their effectiveness against various microbial strains. A structured search of both research and review papers was conducted via different electronic databases, such as PubMed, Bentham, Springer, and Science Direct, among others, for the present review. Along with these, marketed products, patents, and Clinicaltrials.gov were also referred to for our review. Different microbes such as bacteria, fungi, etc., and their diverse species and strains have been reviewed and found to be sensitive to metal-carrying formulations. The products are observed to restrict growth, multiplication, and biofilm formation effectively and adequately. Silver has an apt use in this area of treatment and recovery, and other metals like copper, gold, iron, and gallium have also been observed to generate antimicrobial activity. The present review identified membrane disruption, oxidative stress, and interaction with proteins and enzymes to be the primary microbicidal processes. Elaborating the action, nanoparticles and nanosystems are shown to work in our favor in well excelled and rational ways.

The Antibacterial and Antifungal Capacity of Eight Commercially Available Types of Mouthwash against Oral Microorganisms: An In Vitro Study.

This work aimed to evaluate and compare the antimicrobial actions and effects over time of eight types of mouthwash, based on the impact of chlorhexidine on the main microorganisms that are responsible for oral diseases: Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans. The mouthwashes' antimicrobial action was determined in terms of their minimum inhibitory concentration (MIC), minimum bactericidal/fungicidal concentration (MBC/MFC), and time-kill curves at different contact times (10 s, 30 s, 60 s, 5 min, 15 min, 30 min, and 60 min), against selected oral microorganisms. All the mouthwashes showed a notable effect against C. albicans (MICs ranging from 0.02% to 0.09%), and higher MIC values were recorded with P. aeruginosa (1.56% to >50%). In general, the mouthwashes showed similar antimicrobial effects at reduced contact times (10, 30, and 60 s) against all the tested microorganisms, except with P. aeruginosa, for which the most significant effect was observed with a long time (15, 30, and 60 min). The results demonstrate significant differences in the antimicrobial actions of the tested mouthwashes, although all contained chlorhexidine and most of them also contained cetylpyridinium chloride. The relevant antimicrobial effects of all the tested mouthwashes, and those with the best higher antimicrobial action, were recorded by A-GUM® PAROEX®A and B-GUM® PAROEX®, considering their effects against the resistant microorganisms and their MIC values.

Promising Antimicrobial Action of Sustained Released Curcumin-Loaded Silica Nanoparticles against Clinically Isolated Porphyromonas gingivalis.

BACKGROUND: Porphyromonas gingivalis (P. gingivalis) has always been one of the leading causes of periodontal disease, and antibiotics are commonly used to control it. Numerous side effects of synthetic drugs, as well as the spread of drug resistance, have led to a tendency toward using natural antimicrobials, such as curcumin. The present study aimed to prepare and physicochemically characterize curcumin-loaded silica nanoparticles and to detect their antimicrobial effects on P. gingivalis. METHODS: Curcumin-loaded silica nanoparticles were prepared using the chemical precipitation method and then were characterized using conventional methods (properties such as the particle size, drug loading percentage, and release pattern). P. gingivalis was isolated from one patient with chronic periodontal diseases. The patient's gingival crevice fluid was sampled using sterile filter paper and was transferred to the microbiology laboratory in less than 30 min. The disk diffusion method was used to determine the sensitivity of clinically isolated P. gingivalis to curcumin-loaded silica nanoparticles. SPSS software, version 20, was used to compare the data between groups with a p value of <0.05 as the level of significance. Then, one-way ANOVA testing was utilized to compare the groups. RESULTS: The curcumin-loaded silica nanoparticles showed a nanometric size and a drug loading percentage of 68% for curcumin. The nanoparticles had a mesoporous structure and rod-shaped morphology. They showed a relatively rapid release pattern in the first 5 days. The release of the drug from the nanoparticles continued slowly until the 45th day. The results of in vitro antimicrobial tests showed that P. gingivalis was sensitive to the curcumin-loaded silica nanoparticles at concentrations of 50, 25, 12.5, and 6.25 µg/mL. One-way ANOVA showed that there was a significant difference between the mean growth inhibition zone, and the concentration of 50 µg/mL showed the highest inhibition zone (p ≤ 0.05). CONCLUSION: Based on the obtained results, it can be concluded that the local nanocurcumin application for periodontal disease and implant-related infections can be considered a promising method for the near future in dentistry.

Centella asiatica and Its Metabolite Asiatic Acid: Wound Healing Effects and Therapeutic Potential.

An intense effort has been focused on new therapeutic approaches and the development of technologies for more efficient and rapid wound healing. The research for plants used for long time in traditional medicine in the treatment of wound has become a promising strategy to obtain drugs therapeutically useful in the acute and chronic wound management. In this context, Centella asiatica (Apiaceae) has been used to treat a variety of skin diseases, such as leprosy, lupus, varicose ulcers, eczema and psoriasis, in Asiatic traditional medicine for thousands of years. Studies have shown that Centella asiatica extracts (CAE) display activity in tissue regeneration, cell migration and wound repair process by promoting fibroblast proliferation and collagen synthesis. Preliminary findings have shown that the asiatic acid is one of the main active constituents of C. asiatica, directly associated with its healing activity. Thus, this study discusses aspects of the effects of Centella asiatica and its active component, asiatic acid, in different stages of the healing process of cutaneous wounds, including phytochemical and antimicrobial aspects that contribute to its therapeutic potential.

Antibacterial Aloe vera Based Biocompatible Hydrogel for Use in Dermatological Applications.

The present research aims to describe a new methodology to obtain biocompatible hydrogels based on Aloe vera used for wound healing applications. The properties of two hydrogels (differing in Aloe vera concentration, AV5 and AV10) prepared by an all-green synthesis method from raw, natural, renewable and bioavailable materials such as salicylic acid, allantoin and xanthan gum were investigated. The morphology of the Aloe vera based hydrogel biomaterials was studied by SEM analysis. The rheological properties of the hydrogels, as well as their cell viability, biocompatibility and cytotoxicity, were determined. The antibacterial activity of Aloe vera based hydrogels was evaluated both on Gram-positive, Staphylococcus aureus and on Gram-negative, Pseudomonas aeruginosa strains. The obtained novel green Aloe vera based hydrogels showed good antibacterial properties. In vitro scratch assay demonstrated the capacity of both AV5 and AV10 hydrogels to accelerate cell proliferation and migration and induce closure of a wounded area. A corroboration of all morphological, rheological, cytocompatibility and cell viability results indicates that this Aloe vera based hydrogel may be suitable for wound healing applications.

Does local infiltration analgesia in total joint arthroplasty offer any protection from prosthetic joint infections? An invitro experimental study.

Many local anaesthetic agents are now reported to have anti-microbial properties in various studies, and this ability to inhibit microbial growth is not uniform. As local anaesthetics are commonly infiltrated into the surgical field for perioperative pain management, it is very important to know if this practice offers any protection against surgical site infections. METHODS: In this study, three of the most common prosthetic joint infection-causing organisms, namely, Staphylococcus aureus, Staphylococcus epidermidis and Escherichia coli, were chosen and tested against the commonly used local anaesthetics. The suspension of each organism was inoculated onto three different Mueller-Hinton agar plates and a drop of an undiluted solution of each local anaesthetic agent is inoculated onto one of the three culture plates; vancomycin and gentamicin discs were used as controls. RESULTS: The local anaesthetic agents tested could not inhibit the growth of any of the microorganisms. As there was no inhibition of bacterial growth in the experiment with the above three agents, further experiment with a diluted mixture was not performed. CONCLUSIONS: It can be concluded that local infiltration of anaesthetic agents is less likely to provide any perioperative protection against prosthetic joint infections but may interfere with some diagnostic tests for microbiology.

The Vehicles of Calcium Hydroxide Pastes Interfere with Antimicrobial Effect, Biofilm Polysaccharidic Matrix, and Pastes' Physicochemical Properties.

The objective of the present study was to investigate the pH, volumetric alteration, antimicrobial action, and effect on biofilm matrix polysaccharides of calcium hydroxide (CH) pastes with different vehicles available in endodontics: CH + propylene glycol (CHP), UltraCal XS®, Metapaste®, and Metapex®. The pH was analyzed at different time intervals using a pH meter. For volumetric alteration, a microtomographic assay was performed before and after immersion in water. Enterococcus faecalis was chosen for microbiological tests. The bacterial viability and extracellular matrix were quantified with direct contact evaluation (dentin blocks) and at the intratubular level (dentin cylinders) using LIVE/DEAD BacLight and Calcofluor White dyes via confocal laser scanning microscopy (CLSM). Kruskal-Wallis and Dunn's tests were used to analyze pH and direct contact assays, while one-way ANOVA and Tukey tests were used to analyze volumetric alteration and intratubular decontamination (α = 0.05). Higher pH values were obtained during the initial days. Volumetric alterations were similar in all groups. Lower bacterial viability was obtained for dentin blocks and cylinders when CH pastes were used. UltraCal XS and Metapex had lower values for the extracellular matrix. The pH of all CH pastes decreased with time and did not promote medium alkalization for up to 30 days. CH paste can reduce bacterial viability through direct contact and at an intratubular level; however, UltraCal XS and Metapex are involved with lower volumes of extracellular matrices.

Antimicrobial and Antibiofilm Effect of Brazilian Green Propolis Aqueous Extract against Dental Anaerobic Bacteria.

Green propolis may represent a promising therapeutic alternative against dental anaerobic pathogens because of its antimicrobial action. This study aimed to evaluate the antimicrobial and antibiofilm actions of Brazilian green propolis aqueous extract (BGP-AqExt) against dental anaerobic bacteria. The minimum inhibitory concentration (MIC) and minimum microbicide concentration (MMC) of the extract were determined against the standard strains (ATCC) of Fusobacterium nucleatum, Parvimonas micra, Prevotella intermedia, Porphyromonas gingivalis and Porphyromonas endodontalis. BGP-AqExt was chemically characterized by high-performance liquid chromatography with diode-array detection (HPLC-DAD) analysis. Antibiofilm action was measured by MTT and crystal violet tests. The data were statistically analyzed by ANOVA and Tukey (5%) tests. The extract had antimicrobial action against all tested anaerobic bacteria, with an MIC value of 55 mg/mL for all bacteria, an MMC of 27.5 mg/mL for F. nucleatum and P. micra and 55 mg/mL for P. intermedia. Chemically, BGP-AqExt is composed of quercetin, gallic acid, caffeic and p-coumaric acid, drupani, kaempferol and Artepillin C. Significant reductions in biomass and metabolic action of biofilms were found after BGP-AqExt application. Therefore, BGP-AqExt has an antimicrobial and antibiofilm effect against dental anaerobic bacteria.

Computer-aided discovery of pleiotropic effects: Anti-inflammatory action of dithioloquinolinethiones as a case study.

Most of pharmaceutical agents exhibit several or even many biological activities. It is clear that testing even one compound for thousands of biological activities is a practically not feasible task. Therefore, computer-aided prediction is the method-of-the-choice to select the most promising bioassays for particular compounds. Using PASS Online software, we determined the likely anti-inflammatory action of the 13 dithioloquinolinethione derivatives with antimicrobial activities. Chemical similarity search in the Cortellis Drug Discovery Intelligence database did not reveal close structural analogues with anti-inflammatory action. Experimental testing of anti-inflammatory activity of the synthesized compounds in carrageenan-induced inflammation mouse model confirmed the computational predictions. The anti-inflammatory activity of the studied compounds was comparable with or higher than the reference drug Indomethacin. Thus, based on the in silico predictions, novel class of the anti-inflammatory agents was discovered.

Biocompatible Materials in Otorhinolaryngology and Their Antibacterial Properties.

For decades, biomaterials have been commonly used in medicine for the replacement of human body tissue, precise drug-delivery systems, or as parts of medical devices that are essential for some treatment methods. Due to rapid progress in the field of new materials, updates on the state of knowledge about biomaterials are frequently needed. This article describes the clinical application of different types of biomaterials in the field of otorhinolaryngology, i.e., head and neck surgery, focusing on their antimicrobial properties. The variety of their applications includes cochlear implants, middle ear prostheses, voice prostheses, materials for osteosynthesis, and nasal packing after nasal/paranasal sinuses surgery. Ceramics, such as as hydroxyapatite, zirconia, or metals and metal alloys, still have applications in the head and neck region. Tissue engineering scaffolds and drug-eluting materials, such as polymers and polymer-based composites, are becoming more common. The restoration of life tissue and the ability to prevent microbial colonization should be taken into consideration when designing the materials to be used for implant production. The authors of this paper have reviewed publications available in PubMed from the last five years about the recent progress in this topic but also establish the state of knowledge of the most common application of biomaterials over the last few decades.

Polymeric Dental Nanomaterials: Antimicrobial Action.

This review aims to describe and critically analyze studies published over the past four years on the application of polymeric dental nanomaterials as antimicrobial materials in various fields of dentistry. Nanoparticles are promising antimicrobial additives to restoration materials. According to published data, composites based on silver nanoparticles, zinc(II), titanium(IV), magnesium(II), and copper(II) oxide nanoparticles, chitosan nanoparticles, calcium phosphate or fluoride nanoparticles, and nanodiamonds can be used in dental therapy and endodontics. Composites with nanoparticles of hydroxyapatite and bioactive glass proved to be of low efficiency for application in these fields. The materials applicable in orthodontics include nanodiamonds, silver nanoparticles, titanium(IV) and zinc(II) oxide nanoparticles, bioactive glass, and yttrium(III) fluoride nanoparticles. Composites of silver nanoparticles and zinc(II) oxide nanoparticles are used in periodontics, and nanodiamonds and silver, chitosan, and titanium(IV) oxide nanoparticles are employed in dental implantology and dental prosthetics. Composites based on titanium(IV) oxide can also be utilized in maxillofacial surgery to manufacture prostheses. Composites with copper(II) oxide nanoparticles and halloysite nanotubes are promising materials in the field of denture prosthetics. Composites with calcium(II) fluoride or phosphate nanoparticles can be used in therapeutic dentistry for tooth restoration.